Best Prices On All Your - Car - Truck - SUV - ATV - Parts and Accessories
Auto Parts - Car and Truck AccessoriesCv Joint Boot Clamp Tightening Wrench |
 Cv Joint Boot Clamp Tightening Wrench Use wrench to securely fasten Band-it style free end clamps, roll band and clips or Band-it Jr. style pre-formed CV Boot Clamps. The tool is used by turning the winding mandrel with a 1/2'' socket or wrench. The mandrel tightens the clamp, holding it in place until the ears of the clamp are folded down.By K-D Tools. |
 Hella Dynaview Driving Lights With Automatic Cornering LightsAt last! A driving light that "knows" when to illuminate corners and bends by itself! IntelliBeam® technology monitors transverse acceleration of vehicle and automatically switches appropriate cornering headlamp on at the beginning of bend Illuminates exactly what you need to see for safer driving Conventional driving lights and headlights always shine in one direction—straight ahead! When you steer around corners, you drive into the dark. DynaView® lets you see ahead of the corner, giving you plenty of time to react to hazards. Dimmer decreases brightness of cornering lamp beam to prevent "holes" in beam. Designed for heavy-duty continuous driving under tough conditions—a must for truckers, off-roaders and RVers. Relieves strain by reducing level of concentration needed to drive along winding roads. Works off road—DynaView® reacts to any change in direction with the correct cornering light…even away from the roads. High-tech 7" round dual-bulb headlights are optimized for either left- or right-hand bends. Complete—includes 2 lights, control unit with yaw-rate sensor and professional cable set for quick installation. Sold in pairs. FOUR LAMPS IN ONE SYSTEM! Each lamp includes two 55-Watt H1 bulbs and two reflectors! The top bulb and reflector act as standard driving lights. The bottom reflector is angled to the right or left. When you turn your vehicle, the lower bulb automatically turns on, illuminating the corners! |
| Cv Joint Boot Clamp Tightening Wrench Use wrench to securely fasten Band-it style free end clamps, roll band and clips or Band-it Jr. style pre-formed CV Boot Clamps. The tool is used by turning the winding mandrel with a 1/2'' socket or wrench. The mandrel tightens the clamp, holding it in place until the ears of the clamp are folded down.By K-D Tools. |
