Wireless Back-Up Warning Alarm
Auto Parts - Car and Truck Accessories

Wireless Back-Up Warning Alarm Today's technology helps you prevent accidents! The Back-Up alarm sounds a ''beeping'' alarm when you are backing up to warn pedestrians and other vehicles that your car, SUV, or truck is in reverse. Simply attach to one of your back-up lights for greater safety and peace of mind. Easy to use and install, requires no tools. Stick on Back-Up light No wires, no mess, no installation Back-Up light activates the alarm! When light is off, alarm stops Plus auto parts car and truck accessories.	Wireless Command Motion Indoor/Outdoor Motion Security Alert System The Wireless Command Motion Indoor/Outdoor Motion Security Alert System By Heath/Zenith is a must-have security and safety device for any home, garage, trailer home or apartment. The Wireless Command Security Alert System is very easy to install and no wiring is required. Wireless motion sensor can be mounted anywhere. The wireless motion sensor detects motion up to 70 feet away with 180 detection zone combined with a pulse count technology that reduces false sensing from wind and rain for professional reliability. The Wireless Command Motion Indoor/Outdoor Motion Security Alert System's durable sealed weatherproof sensor design keeps out wind and rain. Light bulbs and batteries not included. Features and Specifications: Easy Installation - No wiring required. Enhances Protection Zone and Detects Motion In Hidden Areas. Photocell Override - Select day/night or night only motion detection. Selectable Light Timer - Select the length of time lights stay on after motion has been detected. Power Outage Reset - Turns lights off automatically if turned on by power interruption or electrical storm. Sensitivity Control - Adjust the range of distance for sensing motion. Pulse Count Technology - Reduces false sensing from wind and rain for professional reliability. Operating Temperature Range: -22 F to +120 F Weatherproof Design - Sensor sealed to keep out wind and rain. Motion Sensor Detects Motion Up To 70 Feet Away. RF Tech Communication - Reduces interference and allow customized light groups. Motion Sensor uses 2 AA batteries (not included) Plus auto parts car and truck accessories.
Wireless Command Motion Sensor The Wireless Command Motion Sensor is a remote motion sensor for use with Heath/Zenith Wireless Command products. The motion sensor has an 180 degree detection zone and will control lights up to 100 feet away, inside or outside. Selectable night only or day and night operation. RF tech communication reduces interference and allow customized light groups. Compatible and controls any Wireless Command receiver such as; Wireless Command Motion Activated Indoor Alert System (ZENSL-6019WH) and the Wireless Command Motion Indoor/Outdoor Motion Security Alert System (ZENSL-6029WH). Mounts anywhere inside or out and operates on 2 AA batteries, not included. Features: Easy Installation, No Wiring Required Controls light on and off up to 100 Feet Away Detects Up To 70 Feet Away In a 180 Arc Controls Any Wireless Command Receiver Up To 100' Away RF Tech Communication - Reduces interference and allow customized light groups. Selectable night only or day/night motion detected Motion Sensor Operates On 2 AA Batteries (not included) Plus auto parts car and truck accessories.	Wireless Command Remote Lamp Set The Wireless Command Remote Lamp Set By Heath/Zenith is perfect for any home, trailer home, garage or apartment. You can turn on/off lights or even dim the lights with a simple to use wireless remote. Controls any Wireless Command receiver up to 100 feet away. The Wireless Command Remote Lamp Set is very easy to install and no wiring is required. The set includes a wireless remote control and a plug-in receiver. Just simply plug the receiver into a electrical wall outlet and plug your lamp into the receiver. Remote batteries included. Features: Easy Installation, No wiring required Controls ON, OFF and Dimming Remote Control Uses 1-12 Volt Batteries (included) Controls Any Wireless Command Receiver Up To 100' Away Receiver Works Up To 300 Watts Incandescent Lights PRODUCT NOTE: For use only with 120 volt incandescent or halogen bulbs. Do not use with fluorescent bulbs, appliances, power supplies, low voltage lighting or any other electrical devices. Plus auto parts car and truck accessories.
Wireless Driveway Alarm And Motion Alert System Don't be caught unaware by unexpected visitors. The Wireless Motion Alert system will send an instant alert from the foot of your driveway to your home when a person or car enters your property. The WMA-3000 is the next step in the evolution of the driveway alarm. The transmitter operates on one 9-volt battery and is easily mounted on a tree or post near the drive. The transmitter uses a passive infrared (PIR) beam to detect people or vehicles to a distance of up to 80 feet, then sends a radio signal back to the WR-3000 receiver up to 3,000 feet away*. The transmitter is weather proof and meant for exterior locations. Up to four zones can be monitored with additional transmitters. The transmitters can be programmed so they will each sound a different tone at the receiver. The WR-3000 is the receiver for the WMA-3000 system. The WR-3000 plugs into a standard wall outlet and can be placed on a table or mounted on the wall. When the receiver gets a signal from the transmitter, one of four different tones (Classical, Westminster Chime, Ding Dong, or Whistle) will sound for a few seconds. There is also a volume control, allowing you to set the sound to the desired level. The WR-3000 is equipped with four form C relays (one for each zone), and one 12-volt DC output terminal that will activate for several seconds when a signal is received. The receiver can be user-programmed, so the 12-volt DC terminal and one relay will activate for 10 minutes, if this is desired. The tones will still sound for several seconds. * Actual range may vary depending on the local terrain. Plus auto parts car and truck accessories.	Wireless Driveway Monitor Features: Indoor receiver chimes and flashes when a vehicle drives past the sensor in your driveway. Up to 1,000 foot range between vehicle sensor and indoor receiver - perfect for long driveways. Unlike other driveway motion detection systems, Driveway Monitor does not get false alarms from pedestrians, animals, or shadows. Driveway Monitor only detects vehicles. Easy installation - Just mount the sensor next to your driveway on the included stake and plug the receiver into any electrical wall outlet inside your home! The Driveway Alarm is completely wireless. 2 'C'-cell alkaline batteries power sensor for 1 year. Will not be triggered by animals, people or shadows. Waterproof, battery-powered sensor mounts next to your driveway. Additional Driveway Monitors, Motion Alert sensors or receivers available to cover multiple areas and to expand your system. Additional sensor will produce a different chime from the receiver when triggered. After activation, there is a five second delay for the unit to reset before the next vehicle will be detected. Can be set to low (7 ft.), medium (10 ft.) or high (15 ft.) sensitivity level (factory default is medium). One (1) year warranty from the date of original purchase. Easy installation. The Wireless Driveway Monitor sends a wireless signal to your home to alert you when a unannounced vehicle enters your driveway. The receiver chimes and the ALERT light flashes red for about 15 minutes. The driveway alert uses a patented magnetometer sensor system. Movement of any large metallic (iron or steel) object close to the driveway sensor will cause the sensor to transmit to the receiver. The range of the Driveway Monitor system varies. Line-of sight, the driveway sensor should work up to 500 feet away from the receiver when mounted to the plastic stake in the ground. The system may work up to 1,000 feet away when mounted 4 to 5 feet off the ground to a large post. Plus auto parts car and truck accessories.

• Previous Index
• Next Index
• Jeep - 4x4 - SUV - Car - Truck - Parts - Accessories at NEDONA