Stinger Angle-Tip Relay PliersDesigned to remove and install relays, which are usually located in confined, hard-to-reach areas. Specially coated tips offer a solid grip on the relay.By OTC. Plus auto parts car and truck accessories. |
Ford 97-03 & 00-04 Excursion Led 3rd Brake LightDescription: Ford 97-03 F150 & F250LD Light-Duty & Ford 00-04 Excursion Red LED Brake Light Kit w/ White LED Cargo Lights - Clear Lens Plus auto parts car and truck accessories. |
Great Neck 1/4 Inch Drive Ratchet1/4'' Drive Ratchet Heat Treated Reversible Plus auto parts car and truck accessories. |
35 Watt Hand Held Halogen Work Light With ClampFeatures 35W halogen light with lens and saftey wire cage with foam padded handle and clamp. Lamp postition and hook are adjustable. Power is supplied via 18/3 120 volt 1 foot cord. Plus auto parts car and truck accessories. |
Leakfinder Bigez Uv Dye Injection Kit For R12 And R134aEasier and More Accurate! - Inject dye into the A/C system with a single hook up! Just turn the handle to add dye! BigEZ assembly makes injecting dye into a pressurized system easier and more accurate. Universal for LOW-SIDE injection of R-12 and R-134a systems Includes: (TP-9745) BigEZ injector assembly with R134a hose (TP-9770-0004) 4 oz. BigEZ multi-dose cartridge with universal dye for all refrigerant systems (TP-107472) R-12 purge/adapter fittingBy Tracerline. Plus auto parts car and truck accessories. |
Emissions Test Passing For DummiesCleans harmful deposits from the fuel injectors and intake valves (critical emissions-related components of the fuel system), preparing the vehicle's engine for peak emissions performance. You'll Pass your Test or your Money Back... Guaranteed! Easy-to-Follow Directions to Pass your City or State Auto Emissions Test Cleans Carburetors, Fuel Injectors, and Intake Valves Reduces Pollutants up to 60% Safe for Catalytic Converters & Oxygen Sensors. One Week Before the Test To ensure good mixing, pour entire contents of bottle into gas tank prior to fill-up (one bottle treats one tank up to 25 gallons). Drive car as you normally would until you have consumed at least 3/4 of the treated tank of gasoline. Refill the tank with gasoline. Day of the Test Warm up the engine! Run engine for at least 15-20 minutes before the test. This gives the catalytic converter time to heat up and reach its highest rate of efficiency. When waiting in line at the test facility, leave the engine running! Repeatedly shutting the engine off and then restarting can build up high levels of emissions that can negatively affect your test results. Plus auto parts car and truck accessories. |