Provision Protective Boot - Black, GlossHold onto it easier and protect it better with these tough ProVision Protective Boots! Available in two styles - easy to clean ''Gloss'' or the easier to hold ''Textured'' finsh. By ProVision. Plus auto parts car and truck accessories. |
Dial-A-Change 5lb Heated Charging Cylinder For R-12Calibrated shrouds make accurate charging simple and the charge is measured by weight for greatest accuracy. Using the calibrations in conjunction with the pressure gauge, you can easily compensate for volume fluctuations that occur as the ambient temperature changes just by ''re-dialing'' the shroud. Heated cylinders help speed the transfer of refrigerant by overcoming the equalization of pressure between the system and the charging cylinder. This reduces the time required for a complete charge. Charges by volume; calibrations on the shroud make it easy to charge the exact amount required. Comes in durable polyethylene case for protection during storage and transit. Cylinder snaps in and out of the case and can be stored either vertically or horizontally. For safety, all cylinders come with pressure relief valves; they automatically reset when a safe working pressure is restored. 5lb., 110V, 1/4'' SAE fittings.By Robinair. Plus auto parts car and truck accessories. |
Permatex Fix-It KitFix-It Kit Includes: (1) Permatex PermaPoxy 5 Minute General Purpose Epoxy: Versatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in five minutes, no clamping needed. Clear appearance. Fills gaps and will not shrink. Resistant to water and solvents.Temperature range -60 F to 180 F (-51 C to 82 C). Permanent strength up to 3400 PSI. (1) Permatex PermaPoxy 5 Minute Plastic Weld: A structural adhesive designed for general purpose bonding of a wide variety of materials. Forms a tough, durable bond to most plastics, composites, ceramics, wood in any combination. Fast curing product with gelling of mixed adhesive in 5-6 minutes and fixturing in 9-10 minutes. NOTE: Will not bond most polyethylene or polypropylene plastics. Bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room tempeerature. Cream appearance. Gap filling to 0.125 inch. Water resistant and good chemical resistance. Temperature range -60 F to 250 F (-51 C to 121 C). Permanent strength up to 3500 PSI. (1) Permatex PermaPoxy 4 Minute Multi-Metal Epoxy: Versatile, easy-to-use, multi-metal epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in four minutes, no clamping needed. Dark grey appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. Temperature range -60 F to 300 F (-51 C to 149 C). Permanent strength up to 4500 PSI. (1) Permatex PermaPoxy 5 Minute Plastic & Fiberglass Epoxy Stick: This two part, hand kneadable, putty type epoxy has contrasting colored materials that are mixed together to form a uniform color to indicate thorough mixing. Stick can be drilled, sanded, threaded or filed and is resistant to fuels and solvents after full cure. Holds in five minutes, useable in thirty minutes. Off-white appearance. Fills gaps and will not shrink. Temperature range -40 F to 400 F (-40 C to 204 C). Permanent strength up to 3000 PSI. Plus auto parts car and truck accessories. |
Nokia 3100 Cell Phone Cable AntennaMr. Bracket offers innovative new products to satisfy the changing needs of mobile consumers in today's technologically evolving world. Mr. Bracket stands for quality in every accessory manufactured. Each product has been designed and engineered with the consumer in mind. For use with the Nokia 3300 cell phone.Required for: Mr. Bracket Magnetic MountFor use with:Nokia 3100 Plus auto parts car and truck accessories. |