Lisle Oil Filter Crusher
Converts Oil Filters into Scrap, and Oil into a Recyclable Product, in Seconds. Operates on shop air from 90 to 150 P.S.I. Crusher cycles in 25 to 30 seconds depending on air pressure and filter size. Easily mounts on the wall. Crushes filters up to 5'' in diameter and 7 3/4'' in height. Removes up to 95% of free flowing oil. Accessories: Automatic Valve Retrofit Kit, Part #76520. With this kit you can convert from manual to automatic operation. Allows operator to push start button and crush filter without holding the button down. Filter Spacer, Part #76390. The filter spacer is used to reduce cycle time. Spacer fits over ram center post to shorten travel time of the ram. Plus auto parts car and truck accessories.
|
Lisle Pinion Bearing Race Driver Set
Set Includes 8 Drivers for Driving Inner and Outer Pinion Bearing Races on 1/2 & 3/4 Ton Ford, Dodge and GM Pickup. Use the extended, two-piece handle for driving rear pinion bearing races. A pneumatic handle is also included for use with an air hammer. Plus auto parts car and truck accessories.
|
Lisle Push Rod Remover
Works on GM V6 2.8L, 3.1L and 3.4L Engines. Quickly removes push rods so you can replace the intake gasket. No need to loosen and retighten the rocker arm. The tool pivots the rocker arm to compress the valve spring and free the push rod for removal. Plus auto parts car and truck accessories.
|
Lisle Short Head Hex Keys, Fractional & Metric
Short Heads for Tight Applications. The 42800 fractional set includes 12 Hex Keys, .05'' through 5/16''. The 42850 metric set includes 9 hex keys, 1.5mm through 10mm. Plus auto parts car and truck accessories.
|
Lisle Spark Plug Rethreading Tool For Ford
Replaces Stripped Spark Plug Threads On Ford V10, 4.6 And 5.4 Liter Engines. This precision tool accurately replaces stripped Ford spark plug threads with new thread inserts. Works on the car without removing the engine head. This set includes a drill, tap, swedge tool, insert tool, 10 steel inserts, plus a vacuum adapter to remove shavings from the chamber. The tool set installs a new spark plug thread insert in the exact original position in approximately 20 minutes. IMPORTANT: An inspection scope must be used to insure all shavings are removed from the combustion chamber. An inspection scope is not included in the 65900 set. Order a 66090 scope and 66100 45 mirror attachment if needed. Plus auto parts car and truck accessories.
|
Lisle Spark Tester
Tests Spark Plugs, Spark Plug Wires and Coils Without Puncturing the Wire. With the engine running, place the grooved end of the tool over the plug wire. The bulb will flash to indicate spark. Plus auto parts car and truck accessories.
|