Fuel And Transmission Line Disconnect Tool Set - 8 PcDurable anodized aluminum construction Seperates fittings on fuel lines, fuel filters, and fuel tank return lines Sizes 1/4'', 5/16'', and 3/8'' oil cooler line disconect tool Ford fuel line disconnect tool provides damage-free line seperation Disconnect tool allows quick seperation of quick connectors found on radiators, transmissions, and power steering lines. Releases fingers on transmission-to-radiator oil cooler line easily without damage to hose or connector. Quick disconnect coupler tool slides down the line and into the connector separating the clip apart without damaging the quick connect seals while allowing removal of clip.By Astro Pneumatic. Plus auto parts car and truck accessories. |
Cooltech Multi - Recovery, Recycling, Evacuation And Recharging Unit For Multilple RefrigerantsThe 17800B recovers, recycles, evacuates and recharges -- all in one fast, continuous operation through one hook-up. It's ideal for refrigerated trailers, buses, RV's, and other vehicles that use more than one refrigerant. The Cool-Tech Multi is also great for fleet maintenance, covering, a variety of makes and models since it has R-12 and R-134a capabilities. In-plant maintenance departments will find it can handle the different types of refrigerants used in various systems. Recovers, Recycles, Evacuates and Recharges R-12, R-134a R-22, R-502 M and HP Blends - and many more! Proven Technology simplifies service! Microprocessor: Controls functions; prompts lead you through programming and also signal when it's time to change the filter-drier, vacuum pump oil and compressor oil. Float Chamber: Automatically adjusts from liquid to vapor for most efficient recovery. Electronic Scale: Makes it simple to recharge to factory specifications; also weighs recovered refrigerant and provides tank overfill protection. Cool-Tech Vacuum Pump: 6 CFM has the capacity to thoroughly evacuate system, readying it for recharging. Versatility for many types of systems! Lockout Panel: Prevents mixing of refrigerants; slides to one side for 1/4'' fitings and to the other for 1/2'' Acme fittings. Single Pass Recycling: Makes an initial pass through the filter-drier; additional recycling can be programmed in case of compressor burn-out, other conditions. Heavy Duty Filter-Drier: Removes moisture and acid from the refrigerant; can handle up to 300 pounds between changeovers. Comes with two 50 pound tanks, one with 1/4'' fittings and the other with 1/2'' Acme fitings. Also three sets of charging hoses are included - one for R-12, one for automotive R-134a (with field service couplers), and one for other refrigerants using 1/4'' SAE fittings. Specifications: Voltage: 115V 60 Hz Tanks: Two 50 lb (23 kg) refillable Operating Range: 50 degree to 105 degree fahrenheit (11 degree to 41 degree celsius) Recovery Rate: Vapor - 1/2 lb/min. (.02 kg/min); Liquid - 4 lbs./min. (1.8kg/min) Recycling Rate: 4 lbs/min.(1.8 kg/min.)flow rate Recycling Filter-Drier: 1150 g XH-9 Pump Free Air Displacement: 6 cfm (142 L/m) at 50 Hz Dimensions: 47'' H x 26'' W x 30'' D (119 cm x 66 cm x 77 cm) Weight: 256lbs (116 kg) without tankBy Robinair. Plus auto parts car and truck accessories. |