NEDONA
    Best Prices On All Your - Car - Truck - SUV - ATV - Parts and Accessories

Air_Con.jpg - 2725 Bytes
Air Conditioning Tools

Auto_Dent.jpg - 4509 Bytes
Auto Body Repair

Auto_Diagnostic.jpg - 3816 Bytes
Diagnotic Equipment

Auto_Equipment.jpg - 3732 Bytes
Lift Equipment

Pullers_Installers.jpg - 4388 Bytes
Pullers - Installers

ServicingEquipment.jpg - 3304 Bytes
Service Equipment

Towing_Tie_Down.jpg - 4459 Bytes
Towing - Tie Downs


Auto Parts - Car and Truck Accessories


15 Inch Variable Speed Drill Press - Floor, #2 Mt Spindle, Chuck And Arbor, 115/220v, 1ph, 1hp Motor With Rotary Drum Switch


15 Inch Variable Speed Drill Press - Floor, #2 Mt Spindle, Chuck And Arbor, 115/220v, 1ph, 1hp Motor With Rotary Drum Switch
Speeds from 400 to 5,000 RPM. Handwheel adjustment sets the speeds. Large 2-1/4'' quill allows greater accuracy. 3'' column diameter for maximum head support. Full bearing support on quill for maximum spindle stiffness. 6'' stroke for deep hole applications. Accurate depth stop for precise hole depths. 1/2'' Drill chuck & arbor. Safety collar. Type: 15'' Floor Cast Iron Drilling Capacity (max./in.): 5/8 Steel Drilling Capacity (max/in.): 1/2 Column Diameter (in.): 3 Quill Diameter (in.): 2-1/4 Spindle Taper: 2MT Spindle Travel (in.): 6 Spindle Speeds (RPM): 400 to 5000 Overall Table Size (in.): 15-1/4 x 17-3/4 Table Working Surface (in.): 12-1/2 x 14-1/2 Number & Size of T-Slots (in.): 2&1/2 Spindle to Table (in.): 41 Spindle to Base (in.): 47-1/2 Overall Height (in.): 67-1/2 Motor A5816/A5836: 1 HP, 115/220V, 1Ph Motor A5818/A5838: 1HP, 220/440V, 3Ph Weight (lbs.): 436 Capacities for continuous production use will vary based on application.By Wilton.


Omix-Ada Distributor Sensors
Don't replace the entire distributor if you don't have to. It may just be the sensor you need to get the spark back in your engine! OE replacement part for worn out sensor 6-month/6,000-mile warranty


15 Inch Variable Speed Drill Press - Floor, #2 Mt Spindle, Chuck And Arbor, 115/220v, 1ph, 1hp Motor With Rotary Drum Switch
Speeds from 400 to 5,000 RPM. Handwheel adjustment sets the speeds. Large 2-1/4'' quill allows greater accuracy. 3'' column diameter for maximum head support. Full bearing support on quill for maximum spindle stiffness. 6'' stroke for deep hole applications. Accurate depth stop for precise hole depths. 1/2'' Drill chuck & arbor. Safety collar. Type: 15'' Floor Cast Iron Drilling Capacity (max./in.): 5/8 Steel Drilling Capacity (max/in.): 1/2 Column Diameter (in.): 3 Quill Diameter (in.): 2-1/4 Spindle Taper: 2MT Spindle Travel (in.): 6 Spindle Speeds (RPM): 400 to 5000 Overall Table Size (in.): 15-1/4 x 17-3/4 Table Working Surface (in.): 12-1/2 x 14-1/2 Number & Size of T-Slots (in.): 2&1/2 Spindle to Table (in.): 41 Spindle to Base (in.): 47-1/2 Overall Height (in.): 67-1/2 Motor A5816/A5836: 1 HP, 115/220V, 1Ph Motor A5818/A5838: 1HP, 220/440V, 3Ph Weight (lbs.): 436 Capacities for continuous production use will vary based on application.By Wilton.




Copyright 2004 - 2008

Mens Lingerie

Men's Lingerie

My Wife

Gift For Wife

Plus Sizes

Plus Size Gift

Gift For Girl Friend

Gift For Girl Friend

Less Than $30.00

On Sale