Best Prices On All Your - Car - Truck - SUV - ATV - Parts and Accessories
Auto Parts - Car and Truck Accessories14 In. Dry-Cut Off Machine |
 14 In. Dry-Cut Off Machine The 6190-20 utilizes dry (a.k.a. ''cold'') cut technology which will cut on average three times faster than an abrasive machine and costs 1-1/2 times less to operate. The saw produces little to no sparks when cutting and leaves a virtually burr-free finish. The motor is a 15 amp, 4.8 max H.P. The base is a heavy-duty cast aluminum reinforced with a 1/4 in. steel plate. The vise and back fence is tool free. The horizontal D-handle provides optimum comfort whether the tool is on the ground or sitting on a bench. Powerful 4.8 max HP motor, 15 amp motor (1,500 rpm). Tool-free fence and vise system. Heavy-duty cast base. Horizontal D-handle for optimum comfort. Largest cutting capacity in class. Cuts fast with virtually no sparks or burrs. Includes: 72 Tooth Blade, Hex Key. Specifications Voltage: 120 AC/DC Amps: 15.0 Wheel Size: 14 in. Max. HP: 4.8 Spindle: 1 in. No Load Speed: 1,500 RPM Spindle Lock: Yes Bevel Capacity: 45 Capacity in O.D. Pipe: 5-3/8 in. Capacity in Bar Stock: --- Capacity in Square Stock: 5 in. Maximum Opening: 8 in. Length: 16-1/2 in. Tool Weight: 50.0 lbs. Shipping Weight: 59.0 lbs.By Milwaukee Electric Tool. |
 4 inch X 10 inch 3-Way SpeakersDeliver 150 Watts per speaker Foam-edged 4" x 10" woofer with 50-oz. magnet, 2" mid-range, 1" tweeter, 4-ohm impedance. Frequency response: 80-16,000 Hz. Mount flush in rear deck. Include wire mesh grilles, wire, mounting hardware, instructions. Sold in pairs. |
| 14 In. Dry-Cut Off Machine The 6190-20 utilizes dry (a.k.a. ''cold'') cut technology which will cut on average three times faster than an abrasive machine and costs 1-1/2 times less to operate. The saw produces little to no sparks when cutting and leaves a virtually burr-free finish. The motor is a 15 amp, 4.8 max H.P. The base is a heavy-duty cast aluminum reinforced with a 1/4 in. steel plate. The vise and back fence is tool free. The horizontal D-handle provides optimum comfort whether the tool is on the ground or sitting on a bench. Powerful 4.8 max HP motor, 15 amp motor (1,500 rpm). Tool-free fence and vise system. Heavy-duty cast base. Horizontal D-handle for optimum comfort. Largest cutting capacity in class. Cuts fast with virtually no sparks or burrs. Includes: 72 Tooth Blade, Hex Key. Specifications Voltage: 120 AC/DC Amps: 15.0 Wheel Size: 14 in. Max. HP: 4.8 Spindle: 1 in. No Load Speed: 1,500 RPM Spindle Lock: Yes Bevel Capacity: 45 Capacity in O.D. Pipe: 5-3/8 in. Capacity in Bar Stock: --- Capacity in Square Stock: 5 in. Maximum Opening: 8 in. Length: 16-1/2 in. Tool Weight: 50.0 lbs. Shipping Weight: 59.0 lbs.By Milwaukee Electric Tool. |
